NINGBO VALVE FACTORY - CHINA VALVE EXPERT & SUPPLIER...
Home -> News & Article

Tilting Disc Check Valve Features
 

Tilting Disc check valve Features

 


(1) Pressure Seal – uncomplicated design has segmented retaining ring and mild steel silver plated gasket to aid disassembly and provide maximum bonnet seal.


(2) Internal Disc Hanger – unique arrangement eliminates pin seal leakage and simplifies maintenance.


(3) Seat Ring – welded-in seat ring is hardfaced for long life.

(4) Body – streamlined flow path minimizes pressure drop. End-to-end dimensions meet ANSI B16.10.


(5) Bonnet Stop – simplify maintenance by keeping bonnet from jamming during disassembly.


(6) Disc – spherical shape for maximum lift with minimum pressure drop. Hardfaced for maximum life.

 

 

GENERAL DESIGN FEATURES


Highly Efficient

  
The NVF tilting disc check valve uses gravity to rapidly close the disc upon reversal of flow. Unlike most other tilting disc check valves which must swing through a 90o arc, the Pacific design fully opens or closes through an arc of only 45o.

This short-arc coupled with the low pendulum effect achieved by pivoting the disc through a point near its center of gravity assures rapid closure.


Tight Shutoff

Conical seating at an angle to flow is self aligning, tight and always closed in a no-flow situation. Even in vertical (flow-up) pipe runs, this valve provides exceptionally tight shutoff.

 

 

Long Life

 
Hardfaced seating surfaces, large diameter hinge pins, and corrosion resistant bearing surfaces help lengthen operating life in tough surfaces. There are no springs to break or bind. A positive internal disc stop prevents flutter.


Internal Disc Hanger

 
Provides adjustable alignment, eliminates body wall penetrations. The unique NVF tilting disc check valve internal disc hanger not only eliminates potential leakage through external hinge pins, but because the hanger shelf is machined parallel to the seating surface, it allows adjustment of the disc/seat if seat repair is ever required. By adding or removing precision stainless steel spacers between hanger and shelf, the disc can be “dropped” into the body so as to provide perfect alignment and shutoff. No other design offers this combination of features.

From: NVF valve knowledge

Home | About NVF | Products | Quality Control | Service | Valve Knowledge | Contact Us | Useful Links | Gate valve
© 2013 NVF Corporation. All rights reserved.  
English German Spanish French Italian Portuguese Japanese Korean Arabic Russian
Tel: +86-574-8720 0715  Fax: +86-574-5670 8316   Mail: sales@ningbo-valve.com  
NVF was found in 1959, we are professional in manufacturing forging steel valve and casting steel valve, gate valve, globe valve, check valve, ball valve, butterfly valve, plug valve and so on.